Olarm LINK

Olarm LINK

The Future of connected, smart automation for existing devices.

Olarm LINK is a smart control and sensing device that allows users to control a wide range of peripherals such as gate motors, garage door motors, boom gates, water pumps and more.

NB: The Olarm LINK will require an Olarm communicator with an active subscription to function.

 

Features:

• DIN Rail mountable (plastic DIN rail included).
• 6x Protected general purpose IO Ports which can either be used as inputs or open drain outputs.
• Analog sensor port for use with either 4-20mA or 0-14V sensors.
• 2 tamper switches.
• RGB status indication light.
• Olarm One-Wire Serial comms bus interface to supported Olarm communicators allowing for up to 8 Olarm LINK to be connected to one communicator.

Alarm Panels compatible with Olarm LINK:

• Paradox – MG5050, MG5050+, SP6000, SP6000+, SP65, EVO 192
• Texecom – Premier 412, Premier 816, Premier 816 Plus, Elite 24, Elite 48, Elite 64, Elite 88, Elite 168
• IDS – 806, X16, X6, X64 Serial

Please Note: Olarm LINK is not compatible with DSC Power Series and IDS 805 Alarm Panels.

Mechanical Specifications:

• Packaged Weight – 107g
• Cable Weight – 40g
• Device Dimensions – 87mm x 70mm x 37mm (L x W x H)
• Enclosure Material – ABS – Resin MG47F
• Mounting – DIN Rail (plastic DIN rail included)

Power Supply:

• Input Voltage – 7 to 24 VDC
• Current Consumption – 25mA (typical), 250mA (max) @ 12VDC

Operating Conditions:

• Temperature: –40 to 60°C
• Humidity – 0-90% RH

Connectivity: (Via an Olarm PRO, Olarm PRO 4G or Olarm MAX Communicator)

• Protocol – Olarm One-wire Serial
• Max Cable Length – 8 Meter

Models:

• LINK8S – 6 GPIO, 2 relays, 1 analog sensor
• LINK8 – 6 GPIO, 2 relays

General Purpose IO ports:

• Number of Ports – 6
• Voltage tolerance – 0-20 VDC
• Max Open Drain Current – 120mA

Sensor Port:

• Number of Ports – 1 Configurable to voltage or current.
• Voltage Sensor – 0-15 VDC
• Current Sensor – 4-20 mA

Smart Input:

• Number of Ports – 1, Connect the Voltage sensor port to the status LED
• Supported Peripherals – Centurion D5 Evo, D5 Smart, D10 Smart, ET Nice Drive 500
• (Please log a support request should your device not be listed. The team at olarm will investigate whether or not support for your device can be configured – support@olarm.com)

Relays:

• Number of Relays – 2
• Contacts per relay – 1 x Normally Open (NO), 1 x Normally Closed (NC)
• Max Voltage – 240VAC / 28VDC
• Max Current – 10A

Configuration:

• Auto-detection when connected to an Olarm Communicator. Follow the instruction on the Olarm APP once connected and LED is blue.

Signals:

• Contact ID on certain events.

Included in the Box:

• 1 x Olarm Link .
• 1 x 1.5m Communications cable.
• 1 x Plastic DIN Rail.
• 1 x DIN rail clip.
• 2 x Screws & 2 x Wall Plugs

Certifications, Accreditations & Test Reports:

• Safety & Health
  • • EN 62368-1:2014+A11: (2017)
    • IEC 62368-1: (2014)
• Electromagnetic Compatibility
  • • ETSI EN 301 489-1: V2.2.3 (2019-11)
    • ETSI EN 301 489-17: V3.2.4 (2020-09)
    • EN 50130-4: 2011+A1: (2014)

Olarm LINK Datasheet

Sawyer Security – Facebook Page